Search This Blog

Thursday, 4 June 2015

Hmmm... soldering is a bit blobby, but all the bits are on the board. I find 0603 components are about as small as I can do with a pair of tweezers and a soldering iron.
I'll clean off the flux after I've soldered on the coax cable. I'm going to look for some miniature PTFE 50 ohm coax at the radio fair on Saturday, but I have some 75 ohm UR111 which will probably do. It will, after all, be feeding a length of RG6 75 ohm coax to the satellite receiver. 73 Hugh

No comments:

Post a comment